Name: Alkyl Polyglucoside Surfactant APG-810
Brand: Coatingsink
SKU: alkyl-polyglucoside-surfactant-apg
Availability: InStock

Question 1

How does the HLB value of APG-810 affect formulation design?

Accepted Answer

APG-810 has an HLB of approximately 13–14, positioning it as an efficient oil-in-water wetting and emulsifying agent. In waterborne coatings, this high HLB supports rapid substrate wetting without destabilizing latex emulsions. Lower HLB synergists can be combined to broaden performance across difficult substrates.

Question 2

Is APG-810 compatible with eco-label and low-VOC formulations?

Accepted Answer

Yes. As a bio-derived, ethylene-oxide-free non-ionic surfactant, APG-810 is compatible with EU Ecolabel, GREENGUARD Gold, and Nordic Swan formulations. It is readily biodegradable (OECD 301B) and contributes no VOC to the final coating.

Question 3

What is the recommended dosage of APG-810 in architectural waterborne coatings?

Accepted Answer

Typical dosage is 0.1–0.5% active on total formulation weight for standard interior/exterior architectural coatings. Increase to 0.5–1.0% for challenging substrates such as heavily chalked surfaces, hydrophobic primers, or siding with water-repellent treatments. Overdosing may increase foam tendency; pair with a silicone or mineral oil defoamer if needed.

HLB Value	13–14
Appearance	Pale yellow to amber liquid
Active Content	50 ± 2%
Density (25°C)	1.07 g/ml
pH (10% aqueous solution)	11.5–12.5

Alkyl Polyglucoside Surfactant APG-810

Specifications

FAQ

Interested in Alkyl Polyglucoside Surfactant APG-810?