木器涂料 化学品

Nitrocellulose-alkyd lacquers are traditional for fast-dry and good sanding properties. Acid-catalyzed (AC) lacquers using melamine-formaldehyde crosslinkers offer better hardness and chemical resistance. Two-component polyurethane (2K PU) — acrylic polyol or polyester polyol with isocyanate — gives the best performance in premium furniture for scratch and solvent resistance.

Waterborne PU dispersions (PUD) provide better flexibility, grain-raise resistance, and block resistance than standard acrylic emulsions for wood flooring and furniture. Pure acrylic dispersions are more cost-effective for interior joinery where appearance is the priority over mechanical performance. Hybrid PU-acrylic dispersions balance cost and performance.

UV-curable wood coatings use acrylate oligomers — typically polyurethane acrylate (PUA) or epoxy acrylate — with reactive diluents and photoinitiators. PUA gives flexibility and adhesion for flooring; epoxy acrylate provides higher hardness and chemical resistance for tabletops. LED-compatible photoinitiators (absorbing at 365 or 395 nm) are required when LED lamps replace mercury.

Engineered wood floor coatings are tested per EN 13696 (wear), EN 13442 (chemical resistance), EN 13745 (slip), and Taber abrasion. Premium 2K PU floor coatings achieve 100,000+ Taber cycles. UV-cured acrylate systems with hard nanoparticle fillers (alumina, silica) approach the durability of 2K PU with the productivity of UV cure on factory finishing lines.

Low-VOC wood finishes use waterborne PU/acrylic dispersions, high-solids 2K PU (>65% solids), or 100% solids UV systems. The EU Decopaint Directive (2004/42/EC) limits VOC; CARB-compliant US wood finishes follow Rule 1136. Bio-based binders (soybean polyols in PU, plant-derived acrylate monomers) and reduced solvent loading are growing trends, particularly in residential furniture finishing.

Wood primers and sealers fill grain, block tannin migration, and provide a uniform base for topcoat. Nitrocellulose-based sanding sealers are traditional. Waterborne acrylic primers are now common for VOC compliance. Tannin-blocking primers (typically with shellac or specialty acrylic) are essential for woods such as oak and mahogany. UV sealers provide rapid throughput on factory finishing lines for engineered floor and panel manufacturing.