水性涂料 化学品

Pure acrylic emulsions dominate architectural waterborne coatings for outdoor durability and UV resistance. Styrene-acrylic copolymers offer cost-effective indoor performance. Polyurethane dispersions (PUD) give superior hardness, chemical resistance, and flexibility for industrial and floor coatings. Waterborne alkyd dispersions combine alkyd's easy application and gloss with reduced VOC emissions.

Coalescents are slow-evaporating solvents that temporarily plasticize polymer particles below their minimum film formation temperature (MFFT), enabling fusion into a continuous film at ambient temperature. Texanol and propylene glycol esters are standard; low-VOC reactive coalescents are used in zero-VOC formulations. Coalescent level is optimized to balance film formation at low temperature against hardness development.

HASE (Hydrophobically modified Alkali-Swellable Emulsions) and HEUR (Hydrophobically modified Ethylene oxide-URethane) associative thickeners provide shear-thinning rheology for leveling and sag resistance. HEC (hydroxyethylcellulose) is a cost-effective thickener for lower-shear applications. Combinations of thickeners optimize KU viscosity, ICI viscosity, and gel structure for specific application methods.

Corrosion-resistant waterborne systems combine epoxy-acrylic hybrid emulsions or epoxy dispersion/amine hardener (waterborne 2K epoxy) with anticorrosion pigments (zinc phosphate, zinc dust, modified aluminum pigments) and barrier additives. Phosphate ester adhesion promoters improve bonding to steel and galvanized substrates. Performance is tested per ASTM B117 salt-spray and ASTM D4585 humidity resistance standards.

EU Directive 2004/42/EC limits architectural interior flat paints to 30 g/L VOC (Phase II). US EPA National AIM Rule limits interior flat paints to 50 g/L. California SCM/CARB limits are tighter — 50 g/L for flat, 100 g/L for non-flat. Industrial maintenance coatings are regulated separately. Waterborne systems typically achieve 30–150 g/L VOC depending on formulation, well below solventborne equivalents at 300–600 g/L.