碳粉配方 化学品

Polyester resins (crystalline or amorphous, or blends) dominate modern color toner for their low fusing temperature, good transparency, and compatibility with colorants — critical for color accuracy in laser printers. Styrene-acrylate (SA) resins are used in monochrome toner and some OEM cartridge formulations. Resin Tg (55–65°C) is engineered to set the minimum fusing temperature and prevent blocking.

Waxes act as internal release agents, preventing toner from sticking to the fuser roller during heat fixation. Low-MW polyethylene wax, carnauba wax, or paraffin wax migrates to the toner surface during fusing to provide release. Wax particle size in the toner matrix must be precisely controlled — typically D50 of 1–3 µm. Fischer-Tropsch wax is preferred in high-quality color toners for its narrow melting range.

CCAs control the triboelectric charge of toner particles — either positively or negatively. Negative CCAs (chrome/zinc salicylate complexes, azo dye complexes) are most common. Positive CCAs use quaternary ammonium salts or amino-silane compounds. CCAs must be uniformly dispersed in the toner matrix at 0.5–3% to achieve the target charge level (typically -15 to -35 µC/g).

Conventional toner is produced by melt-mixing/pulverization — yielding irregular particles 6–10 µm with broad size distribution. Chemically-prepared toner (CPT) — emulsion aggregation (EA) or suspension polymerization — produces more spherical particles with controlled 4–7 µm size and narrow distribution. CPT enables sharper image quality, better transfer efficiency, and lower toner consumption — now standard in premium color printing.

Modern toner formulations are designed for low VOC emission during fusing, low ozone generation in corona charging, and compliance with EU RoHS / REACH and German Blue Angel standards. Bisphenol A migration is controlled via low-Mw polyester resins and resin purification. Encapsulated CCAs prevent migration. Recyclable cartridge programs and remanufactured toner using compatible base resins are growing in market share.

Color toners use cyan (phthalocyanine), magenta (quinacridone), yellow (azo or BiVO4), and black (carbon black) pigments at 4–8% loading. Pigments are wax-encapsulated or melt-mixed to optimize transparency and color saturation. Resin Tg, melt viscosity, and surface energy are tuned for proper gloss and color development on the receiver paper. Flexible photoreceptor and intermediate transfer belt requirements add complexity for high-speed color presses.