橡胶配混 化学品

Sulfur vulcanization with organic accelerators (sulfenamides like CBS or TBBS for NR/SBR/EPDM) is the dominant system. Peroxide vulcanization (dicumyl peroxide, DCP) is used for EPDM, silicone, and where low compression set is required. The accelerator type and sulfur level control crosslink density, network type (mono-, di-, polysulfidic), and properties such as heat aging.

Carbon black provides excellent reinforcement and abrasion resistance at low cost — the standard for black rubber articles. Precipitated silica gives better wet grip with lower rolling resistance for passenger tire treads (the 'magic triangle' advantage). Silica requires a bifunctional silane coupling agent (TESPT, Si69) for good rubber-filler bonding since silica does not bond directly to most rubber matrices.

Amine antioxidants (PPD class: IPPD, 6PPD) are the most effective for dynamic fatigue and ozone protection in diene rubbers — 6PPD is the dominant antioxidant in tire compounds. They stain so are limited to black or dark applications. Non-staining phenolic antioxidants (AO-4426, AO-2246) are used in light-colored rubber goods. Wax-based antiozonants bloom to the surface to form a physical ozone barrier.

Tread compounds prioritize abrasion resistance, wet/dry grip, and rolling resistance — using high-cis polybutadiene or NR/SBR/BR blends with silica or carbon black. Sidewall compounds emphasize fatigue resistance, weatherability, and flex-cracking — typically NR/BR blends with antiozonants. Belt and ply compounds focus on steel-cord adhesion and heat resistance using carbon-black-reinforced NR/SBR.

Process oils (paraffinic, naphthenic, aromatic) reduce mixing viscosity and improve filler dispersion at 5–20 phr. Peptizers (zinc 2-mercaptobenzothiazole, pentachlorothiophenol) lower NR molecular weight for processing. Tackifiers (terpene resin, hydrocarbon resin) build green tack for tire building. Silane coupling agents bond silica filler to the rubber matrix in modern fuel-efficient tread compounds.

Automotive EPDM seal compounds combine high-ENB EPDM with carbon black, oils (paraffinic), and sulfur or peroxide cure systems. Compression set under 20% at 70°C/22 h is required. Specific gravity and shore A hardness are tightly controlled for sealing performance. Surface coatings (silicone, PTFE-based) reduce friction for sliding seals. Thermoplastic vulcanizate (TPV) — dynamically vulcanized EPDM in PP — is increasingly used for complex extruded profiles.