Selladores Elásticos Productos Químicos

Silicone sealants have the best UV and temperature resistance — standard for structural glazing and high-movement facade joints — but are difficult to paint over. Polyurethane (PU) sealants are paintable with excellent mechanical strength, preferred for floor joints and expansion joints in concrete. MS polymer sealants combine PU's paintability with silicone-level weather resistance — the most versatile and fastest-growing type in construction.

Acetoxy (acid-cure) silicone sealants use acetoxysilane crosslinkers — the classic shower sealant with characteristic acetic acid odor. Oxime-cure (neutral cure) silicones use methylethylketoxime (MEKO) crosslinkers — standard for construction and glazing. Alkoxy-cure silicones use alkoxysilane crosslinkers for paintability and adhesion to concrete. Tin (DBTDL) or titanate catalysts accelerate cure.

Elastic sealant movement capacity (±12.5%, ±20%, or ±25%) is measured by ISO 9047 or ASTM C719 — cured specimens are cyclically extended and compressed while monitoring adhesion. Joint design is critical: standard rule is sealant bead width should be twice the expected movement. High-movement sealants (MS, hybrid, or high-quality silicone) are specified for curtain wall and façade applications.

For ±25% movement, joint width is typically 10–25 mm with depth = ½ × width up to 12 mm maximum. Backer rod (closed-cell PE foam) controls depth and prevents three-side adhesion (which causes failure). Hourglass bead profile distributes strain evenly. Bond-breaker tape is used in fillet joints. Primer is required on porous (concrete) and some low-energy (PP, PTFE) substrates.

ASTM C920 (and ISO 11600) classify sealants by Type, Grade, Class (movement %), and Use. Class 25 / Class 50 sealants undergo cyclic adhesion-in-peel testing. EN 15651 covers façade, glazing, and sanitary applications in Europe. Pull-off adhesion testing is performed at the project site to verify substrate-specific bonding before warranty — a mandatory step on commercial curtain-wall projects.

One-part sealants (silicone, MS polymer, PU) cure by atmospheric moisture — simple to use but cure depth is limited to ~5 mm/24 h. Two-part sealants (PU, polysulfide) cure throughout regardless of joint depth — preferred for deep joints and large bead applications. Two-part systems require precise mixing and have shorter pot life. Industrial applications and immersion-service joints typically specify two-part for full-depth cure assurance.